The Seas Loki Speaker Kit comes complete with a professionally soldered crossover consisting of high end german crossover components and 1x Seas Prestige T18RE/XFCTV2 Coaxial Driver.
The new Crossover design featured in this kit was designed by Bjørn Magne Idland of the Seas R&D team. The crossover utilises Audyn Cap Q6 Polypropylene Capacitors and Intertechnik Varnish Baked Inductors along with 10w Metal Oxide Resistors.
Cabinet Information:
Recommended bass reflex cabinet is 12 liters (.43 ft3) with dimensions of 8" wide x 15” tall x 11" deep. Front or rear port this enclosure with a 2" internal diameter x 6.5" long port tube. You may also choose to build a 7.5 liter sealed box for the Loki if you would like a smaller footprint and do not require the low end extension that the ported box offers.
Specifications:
- 8 ohm impedance
- 87dB sensitivity
- Frequency response: 46Hz (@-3dB) to 25kHz
- Power handling: 80W Long Term, 250W Short Term
- Ported cabinet dimensions: 8" wide x 15” tall x 11" deep
- Sealed cabinet demensions: 8" wide x 12” tall x 8.5" deep
|
