The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.

The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.

D2004/602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.

The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

Driver Highlights: 3/4” soft dome, compact size, ring neodymium magnet, aluminium faceplate and house, protective grill.

Scan-Speak Illuminator D2004/6020-00 tweeter

Electrical Data
Nominal Impedance Zn 4 ohm
Minimum Impedance Zmin 3.4 ohm
Maximum Impedance Zo 11.6 ohm
DC Resistance Re 2.8 ohm
Voice Coil Inductance Le 0.02 mH

TS Parameters
Resonance Frequency fs 600 Hz
Mechanical Q factor QMS 4.42
Electrical Q factor QES 1.42
Total Q factor Qts 1.07
Force Factor Bl 1.3 Tm
Mechanical Resistance Rms .2 Kg/s
Moving Mass Mms .22 g
Suspension Compliance Cms .32 mm/N
Effective Piston Area sd 4.5 cm^2
Sensitivity 2.83V/1m 88.4 dB

Power Handling
100h RMS noise test IEC 60 W
Long-term Max Power IEC 18.3 120 W

Voice Coil and Magnet Parameters
Voice Coil Diameter 19 mm
Voice Coil Height 1.8 mm
Voice Coil Layers 2
Height of the Gap 2.5 mm
Linear Excursion +/- .4 mm
Max mech. excursion +/- 1.6 mm
Diameter of Magnet 35.5 mm
Height of Magnet 4 mm
 

Driver Highlights: Low loss suspension, sliced paper cone, SD-1 motor