The Discovery tweeter uses a very light, low mass “soft dome" with high internal damping, and a highly-optimized, low-compression magnet system, which was designed especially for the low mass dome. The result is a driver that has both good sensitivity and an impressive range into the lower frequencies. The low mass dome, coupled with a fully vented motor system provides non-compressed sound reproduction over the entire frequency response. This combination allows the Discovery tweeter to be used in systems with lower cross-over points than is recommended for most normal tweeters, making this product a powerful tool for any acoustic designer in the process of tuning a system.
Scan-Speak Discovery 1" textile dome tweeter (formerly 810921) Made in Denmark
Very light, low mass soft dome diaphragm with high internal damping
Highly-optimized, Low-compression Magnet System with Double magnets
Magnetic fluid
Fully Vented Motor System
Low resonance Frequency
High efficiency (93dB)
Black Die-Cast Aluminium Face Plate
8 ohm
8 ohm impedance
fs 700 Hz
93 dB
104mm diameter flange
72mm cut out diameter
27.65mm depth
25.4mm = 1 inch
For a drawing of the dimensions, please see PDF file. Link is below.
|